CB Electronics TG-1HD

Timecode In - Out: Converts both standard and frame rate. Any combination of 23.97 : 24 : 24.97 : 25 : 29.97 : 30 supported.


Timecode Standard/Framerate Converter

• Timecode Input any standard     24, 25(EBU), 30(SMPTE), DROP FRAME
• Timecode Output any standard     24, 25(EBU), 30(SMPTE), DROP FRAME
• Input : Output Frame Rate Gearbox     23.97 : 24 : 24.97 : 25 : 29.97 : 30
• Switchable Timecode     Generator Lock Source Reader, Video
• RS232 Serial Interface     ASCII Protocol
• 6 Preset configurations     Easy Setup for Repeat Jobs

Examples

•     The M & E track has been supplied with 29.97 fps SMPTE timecode and you are working with 25 fps EBU timecode.
•     You are dubbing the final mix to film at 24 fps and you are supplied with a dialogue tape recorded to 25fps Video.
•     The Timecode Gearbox may also be used to change standard/timecode value without gearbox action.
•     You are working with a system that does not recognise Drop frame code and you need to convert from Drop to Non Drop.
•     You have almost finished your Mix and a new video is supplied with a different timecode. The Synchronizer section of the TG-1 may be used to synchronize any non-linear VTR (V-Mod, V-1, Viper) or Dynamic scan VTR at a different frame rate.
•     You wish to prepare the music tracks for a 24fps film to a 25fps PAL video, you can use the TG-1 to slave the Video to 24fps so that there is no pitch shift on the final version.