The P1 Pro is a MOSFET Class A/B design dual mono power amplifiers. with 150 W per channel into 8 Ohms. At 150 W per channel into 8 Ohms, this fan-less, rack-mountable power amplifier offers the perfect solution for any studio wishing to get the best out of their passive monitors.
The P1 Pro features a 19-inch rack-mount chassis with front panel mounted standby button and L/R clip indication. The amplifiers incorporate the same gain reduction and loudspeaker protection circuits that are used in the ATC active monitors. These circuits ensure that the amplifier will not clip, even when working at very high volumes, which protects the loudspeakers from damage and improves the subjective performance of the entire system. Importantly, neither amplifier uses a fan, so they can be placed anywhere, including the control room.
The P1 Pro is a ‘true’ dual mono design: the power supplies, signal, and return paths are totally separated from each other. This approach maximizes signal separation and minimizes crosstalk. Further, intermodulation between channels via the power supplies is reduced to an absolute minimum at all frequencies, and the power demand from one channel cannot affect the specified power available to the other channel.
Features
150W per channel
Class A/B operation
Hand built in the UK
True dual mono design
Balanced and unbalanced inputs
Amplifier link output
19? rack mountable
Front “standby” button
6 year warranty
300W per channel.
True dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk
Grounded source class A/B circuit topology as found in ATC’s renowned active loudspeakers.
Ultra wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients.
No compromise, high performance power supply and large heatsinks guarantee outstanding stability and long term reliability.
A perfect match for any passive studio reference monitor.
19” Rack mountable convection cooled chassis
Hand built in the UK and supported by a 6 year warranty.
Specifications:
Output Power: 300W (8 Ω, 1kHz, continuous. avg., both channels driven)Input Sensitivity: 2V RMS (ref. 150W out)Input Inpedance: 10kΩ/legFrequency Response: <2Hz – >400kHz (-3dB)Signal to Noise Ratio: >115dB (IEC ‘A’)Crosstalk: >100dB (10Hz – 20kHz)THD: >0.002%/-95dB (8 Ω, 1kHz, -1dB below full Power)Damping Factor: >400 (8 Ω)Dimensions (HxWxD): 141.1×482.6×365.6mm (3U tall with feet removed)Weight: 24kg/52.8lbs
Der SCM0.1/15 ist ein aktiver Subwoofer mit integrierter 1000W Class-A Endstufe und einem robusten 375 mm Tieftöner. Der maximale Dauerpegel für Frequenzen bis hinunter zu 20Hz beträgt 118dB @ 1m mit sehr geringen Verzerrungen. Der SCM0.1/15 kann beispielsweise zum Abhören des LFE Kanals in Surround-Anwendungen oder zur Erweiterung der tiefen Frequenzen in Systemen mit kleineren Hauptmonitoren wie den SCM20 ASLPro eingesetzt werden. Eine vielseitige Benutzerschnittstelle ermöglicht die Einstellung der Verstärkung, der Trennfrequenz, der Frequenzkontur und der Phasenlage. Zum Anschluss an die professionellen Systeme SCM200ASL oder SCM300ASL sind größere maßgefertigte Subwoofer auf Basis des SCM0.1-15 erhältlich.EigenschaftenSuperlinearer 375mm Tieftöner mit 75mm GewebekalotteClass-A Verstärker mit 1000WPhaseneinstellung, variable Trennfrequenzvariable VerstärkungStereo-Eingänge6 Jahre Garantie
The SCM12 Pro is a high performance 2-way passive nearfield monitor with an installation-friendly footprint ideally suited to nearfield monitoring as well as multichannel music and post-production applications.
The tweeter is a 25mm/one-inch soft-dome designed around ATC’s unique dual-suspension technology. Unlike conventional tweeters, this precision part employs two suspensions, offering far greater control of the voice coil and dome motion — especially at higher sound pressure levels. The result is an extended high-frequency response with much greater clarity and definition due to the reduction in disturbing anharmonic distortion. Listener fatigue is also greatly reduced, resulting in users being able to work for longer periods with greater accuracy.
At the lower end of the frequency spectrum, mid/bass reproduction is handled by ATC’s 150mm/six-inch proprietary CLD drive unit with a 45mm/1.75-inch diameter voice coil. The driver is capable of tremendous dynamic range with minimal power compression. Tthis construction creates a smooth on- and off-axis frequency response and also a reduction in distortion leading to a more lifelike reproduction of source material. Meaningfully, judgements and decisions can be made more quickly, more accurately, and for longer periods of time by busy working audio professionals.
The monitor is equipped with a "bi-wire" connection panel to enable separate amplification of mid/bass and high frequency drivers if required.
Features
Compact very high performance passive 2-way studio monitor
Ideally suited to critical near-field listening applications in all control rooms and LCR and surround monitoring in small-to-medium control rooms
Proprietary ATC 150mm/6” CLD Mid/Bass Driver
Proprietary ATC 25mm/1” Dual Suspension Tweeter
Dimensions (H x W x D): 400 x 238 x 235 mm
6 year product warranty
SCM20ASLPro-MKII - 2-way Active LoudspeakerThe ATC SCM20ASL Pro (V2) is an active 2-way loudspeaker ideally suited to critical nearfield listening applications in all control rooms, LCR surround monitoring in small-to-medium control rooms, and surround channels in medium-to-large control rooms and provides faster editing with more consistent results on EQ'ing and balancing and less listening fatigue.ATC’s 150mm/six-inch Super Linear bass/mid driver with a 75mm/three-inch voice coil and a short-coil, long-gap topology combines the high-power handling and low-power compression usually only found in large, high-efficiency systems with the fine resolution and balance of modern highfidelity systems. As a perfect complement the ATC SCM20ASL Pro (V2) features the ATC’s SH-25-76S 25mm/one-inch soft dome tweeter. With a massive neodymium motor, it provides an unparalleled linear and extended frequency response (-6dB @ 26kHz) and low non-linear distortion.The amplifier is based on a discrete MOSFET Class A/B design with 200W and 50W continuous power available for the bass and high frequency sections, respectively and includes protection circuits for both DC offset and thermal overload. Controls for sensitivity and a low frequency shelf control help to achieve good balance in difficult acoustic conditions.The cabinet is constructed from heavily-braced MDF. Highly damped, elastometric panels are bonded and stapled to the cabinet’s inner walls to suppress cabinet panel resonances, while the enclosure’s front panel is heavily radiused to reduce cabinet diffraction, improving the frequency response and imaging.Features- Compact very high performance 2-way studio monitor- Ideally suited to critical near-field listening applications in all control rooms- LCR surround monitoring in small-to-medium control rooms and surround channels in medium-to-large contol rooms- Proprietary ATC 150mm/6” Super Linear Mid/Bass Driver- Proprietary ATC 25mm/1” Super Tweeter- Discrete MOSFET class A/B bi-amp pack with 200W/50W continuous power output- 6 year product warranty
The SCM25A Pro Mk2 is a compact 3-way high-performance active studio monitor loudspeaker, based around a 6.5”/164mm bass driver. The monitors combination of exceptional mid-range clarity, high output, extended bass response and modest size makes it ideal for nearfield monitoring in a wide range of critical applications.
The latest Mk2 version is updated with ATC’s latest SH25-76S ‘Dual Suspension’ tweeter, extending the high-frequency response along with a reduction in distortion. These improvements ensure faster decision making and outstanding translation outside the studio.
KEY FEATURES
3-way design featuring ATC SM75-150 Soft Dome mid-range driver.
Wide dispersion vs frequency for excellent stereo imaging over a large listening area.
ATC discrete MOSFET class A/B amp-pack delivers high dynamic range in combination with very low distortion and an extended HF bandwidth.
4th order active crossovers with all-pass phase compensation ensure outstanding driver integration.
Input sensitivity and bass ‘lift’ user controls.
Hand-built in England and covered by a 6-year warranty.
Der SCM25APro verbindet die Erfahrung aus über 20 Jahren ATC Firmentradition mit neuesten Erkenntnissen aus der Materialkunde zu einem radikalen Lautsprecherkonzept. Das Ergebnis ist ein sehr kompakter Aktivmonitor mit hoher Belastbarkeit und unfehlbarer Präzision, kurzum das ultimative Monitorsystem. Dank des verzerrungsarmen 175mm Tieftöners mit kurzer Schwingspule in Kombination mit der legendären 75mm Soft Dome Mitteltonkalotte und einem 25mm Hochtöner liefert der SCM25APro Monitor eine überragende Referenzleistung, die man in der Regel nur von großen 3-Wege Systemen erwartet. Ermüdungsfreies, detailgetreues Abhören ohne Sättigungserscheinungen im Ohr, sind mit diesem Monitor der Refernzklasse problemlos zu realisieren.Das aktive 3-Wege Design beinhaltet drei separate Verstärkerblöcke in jedem Gehäuse mit 150W für Bass, 60W für die Mitten und 26W für die hohen Frequenzen und liefert einen Dauerschallpegel von bis zu 109dB/1m. Selbst bei maximaler Lautstärke überzeugt das System durch niedrigste Verzerrungen, eine solide Stereo-Abbildung und einen hohen Grad an Linearität.Die Lautsprecherchassis sind spiegelbildlich angeordnet und gestatten so ein optimales Klangfeld an der Abhörposition. Die Mitteltonkalotte definiert den Referenzpunkt der Schallquelle.Das interne Netzteil kann zwischen 100, 110 und 230V umgeschaltet werden und garantiert so überall auf der Welt einen optimalen Plug and Play Betrieb.Eigenschaften25mm Soft Dome Neodym-Hochtöner75mm Soft Dome Referenz-Mitteltöner175mm Basslautsprecher mit kurzer SchwingspuleInterne handgewickelte FlachdrahtspuleSymmetrisches Magnetfeld im Basstreibermassiver optimierter Antrieb im Basschassis3-Wege ATC Leistungsverstärker mit 150W+60W+26WClass-A Betrieb bis zu 2/3 der NennleistungStark dämpfendes Gehäuse6 Jahre Garantie
Overview
Mid-size very high performance active 3-way studio monitor
Ideally suited to: - critical near-field listening applications in all control rooms - LCR surround monitoring in medium control rooms - surround channels in medium-to-large contol rooms
ATC hand built 6.5˝/164mm carbon-paper cone bass driver.
ATC 25mm/1” Dual Suspension Super Tweeter
Discrete MOSFET class A/B bi-amp pack with 150W/60W/25W continuous power output
Features
Active 12" subwoofer
High performance sealed box design using 12”/314mm ATC proprietary sub driver.
Ideal partner to the ATC SCM12, SCM20, SCM25A Pro, SCM45A Pro, SCM50A Pro.
Suitable for use in stereo, surround and immersive audio applications.
On-board 300W convention cooled discrete MOSFET class A/B amp.
2 x balanced XLR inputs
2 x balanced XLR outputs (un-filtered/processed).
User adjustable gain, low pass frequency, polarity and phase settings.
Remote sub muting via latching footswitch (supplied separately, latching type, ¼”/6.35mm jack connection)
In-Wall variant with remote amplifier also available – the SCS70iW Pro.
4.349,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...